Overview
- All high tech extruders are built using the new “Flicker regulations”
- Decisively less wear parts than other extruder brands
- Each extruders’ main screw and cylinder barrel are made out of tempered steel
- Patented temperature measurement system by Dohle (Germany). The thermocouple is located inside the mass barrel on the outlet, guaranteeing a perfect temperature
- Cold start protection by mass and air temperature
- Set and actual temperature displayed at the same time
- Auto air types exceed the specified minimum air quantity of 300 l/min
- All types can be upgraded with a revolving head with integrated preheat nozzle to weld in any direction
- No wear parts on the rod feed system
- Lower weight due to the use of light weight materials
- Integrated thermo – blocker protects the drive machines
- Rotatable handle
- Longer lifetime
- Less wear parts
- Easier maintenance
Available ExOn 5 options:
| DX309 | Extruder type ExOn 5, 230V, 5mm (replaces type 5002 CS) |
| DX309.400 | Extruder type ExOn 5, 400V, 5mm |
| Technical data | ||
| Voltage | V | 230 / 400 |
| Frequency | Hz | 50 / 60 |
| Power consumption | W | 5300 |
| Output with HDPE material | lbs/h | max. 11 |
| Welding consumable | 5 round | |
| Dimensions lxwxh | mm | 660x126x448 |
| Weight | lbs | 24.25 |
| Pre-heater | brushless | |
| Welding materials | PE, PP | |
| Protection class I | ||
| Markings | CE |
Operating Instructions:
Catalog:
Extruder Accessory Listings:
- Description
-
- All high tech extruders are built using the new “Flicker regulations”
- Decisively less wear parts than other extruder brands
- Each extruders’ main screw and cylinder barrel are made out of tempered steel
- Patented temperature measurement system by Dohle (Germany). The thermocouple is located inside the mass barrel on the outlet, guaranteeing a perfect temperature
- Cold start protection by mass and air temperature
- Set and actual temperature displayed at the same time
- Auto air types exceed the specified minimum air quantity of 300 l/min
- All types can be upgraded with a revolving head with integrated preheat nozzle to weld in any direction
- No wear parts on the rod feed system
- Lower weight due to the use of light weight materials
- Integrated thermo – blocker protects the drive machines
- Rotatable handle
- Longer lifetime
- Less wear parts
- Easier maintenance
Available ExOn 5 options:
DX309 Extruder type ExOn 5, 230V, 5mm (replaces type 5002 CS) DX309.400 Extruder type ExOn 5, 400V, 5mm - Specs
-
Technical data Voltage V 230 / 400 Frequency Hz 50 / 60 Power consumption W 5300 Output with HDPE material lbs/h max. 11 Welding consumable 5 round Dimensions lxwxh mm 660x126x448 Weight lbs 24.25 Pre-heater brushless Welding materials PE, PP Protection class I Markings CE - Manuals
-
Operating Instructions:
Catalog:
Extruder Accessory Listings:
- Videos
