BAK ExOn Extruders
- All high tech extruders are built using the new “Flicker regulations”
- Decisively less wear parts than other extruder brands
- Each extruders’ main screw and cylinder barrel are made out of tempered steel
- Patented temperature measurement system by Dohle (Germany). The thermocouple is located inside the mass barrel on the outlet, guaranteeing a perfect temperature
- Cold start protection by mass and air temperature
- Set and actual temperature displayed at the same time
- Auto air types exceed the specified minimum air quantity of 300 l/min
- All types can be upgraded with a revolving head with integrated preheat nozzle to weld in any direction
- No wear parts on the rod feed system
- Lower weight due to the use of light weight materials
- Integrated thermo – blocker protects the drive machines
- Rotatable handle
- Longer lifetime
- Less wear parts
- Easier maintenance
AVAILABLE EXON PRODUCTS:
- ExOn 3A
- ExOn 5 (5002 CS)
Description
Operating Instructions:
Catalog:
Spec Sheet:
- BAK ExOn 3A Spec Sheet
- BAK ExOn 5 Spec Sheet
EXON 3A - Tech Specs
Voltage: 230V
Power Consumption: 3600W
Output: 6.60 lbs/hr
Rod: 4 or 5** mm round
Size: 24 x 7.87 x 11.41 in
Welding Materials: PE, PP
Weight: 17.63 lbs
Frequency: 50/60 Hz
Accessories: Special Accessories Available Upon Request
- New output of 6.60 lbs/hr
- The deep groove ball thrust bearing of the new screw is inside the gear box and completely protected from outside dirt
- Thermocouple and cords are more protected to avoid damage
EXON 5 (5002 CS) - Tech Specs
Voltage: 230V
Power Consumption: 5300W
Output: 11 lbs/hr
Welding Materials: PE, PP
Weight: 26.02 lbs
Frequency: 50/60 Hz
Accessories: Special Accessories Available Upon Request
Thermocouple and cords are more protected to avoid damage