Exon Extruders

AVAILABLE EXON PRODUCTS:

  • Exon 3A
  • Exon 5 (5002 CS)

Description

  • All high tech extruders are built using the new “Flicker regulations”
  • Decisively less wear parts than other extruder brands
  • Each extruders’ main screw and cylinder barrel are made out of tempered steel
  • Patented temperature measurement system by Dohle (Germany). The thermocouple is located inside the mass barrel on the outlet, guaranteeing a perfect temperature
  • Cold start protection by mass and air temperature
  • Set and actual temperature displayed at the same time
  • Auto air types exceed the specified minimum air quantity of 300 l/min
  • All types can be upgraded with a revolving head with integrated preheat nozzle to weld in any direction
  • No wear parts on the rod feed system
  • Lower weight due to the use of light weight materials
  • Integrated thermo – blocker protects the drive machines
  • Rotatable handle
  • Longer lifetime
  • Less wear parts
  • Easier maintenance

 

EXON 3A - Tech Specs

Voltage: 230V
Power Consumption: 3600W
Output: 6.60 lbs/hr
Rod: 4 or 5** mm round
Size: 24 x 7.87 x 11.41 in
Welding Materials: PE, PP
Weight: 17.63 lbs
Frequency: 50/60 Hz
Accessories: Special Accessories Available Upon Request

  • New output of 6.60 lbs/hr
  • The deep groove ball thrust bearing of the new screw is inside the gear box and completely protected from outside dirt
  • Thermocouple and cords are more protected to avoid damage

EXON 5 (5002 CS) - Tech Specs

Voltage: 230V
Power Consumption: 5300W
Output: 11 lbs/hr
Welding Materials: PE, PP
Weight: 26.02 lbs
Frequency: 50/60 Hz
Accessories: Special Accessories Available Upon Request

Thermocouple and cords are more protected to avoid damage