HAPCO, INC. - HEAT WELDING PRODUCTS, HONDA GENERATORS, & HONDA PUMPS HAPCO, INC. offers free covers for Honda Generators
Heat welding products, hot air blowers, Honda generators, & Honda pumps.

Gillette Generators products

Gillette SENTRY-PRO SPV-SPH SERIES 8-16KW

Gillette SENTRY-PRO SPV-SPH SERIES
8-16KW

Features
  • EXCLUSIVE "KLEEN-POWER" design allows only 6-7% harmonic distortion of the generated power sine-wave on all air-cooled 3600 rpm gen-sets. Liquid cooled 1800 RPM gen-sets yield only 3-4% harmonic distortions. Harmful harmonic distortions over 10% on any generated sine-wave, may do damage to your electric load.
  • EXCLUSIVE "POWER-ASSIST" design allows 15% more copper wire and electrical grade steel laminations than leading competitor gen-sets. This gives you huge extra starting power for hard starting electrical motors.
  • EXCLUSIVE HEAVY DUTY DIODES gives you a "life time warranty" from failure on the most frequently replaced part on other brand gen-sets. (7.0kw thru 12.0kw only)
  • EXCLUSIVE HEAVY-DUTY CAPACITOR gives you "Life-Time" warranty from failure on the second most commonly replaced part on other brand gen-sets. (7.0kw thru 12.0kw only)
  • EXCLUSIVE, AUTOMATIC LOAD BALANCE eliminates load chatter and excessive vibration due to unbalanced electric loads. (7.0kw thru 12.0kw only)
  • EXCLUSIVE, INSULATION DESIGN gives you superior insulation against un-wanted heat for a longer lasting winding. (7.0kw thru 12.0kw only)





Technical Specifications

GENERATOR MODELS WITH SINGLE AND THREE PHASE KW/KVA RATINGS
1 PHASE MODELS SPH-85-1 SPH-100-1 SPH-120-1 SPV-160-1
Max Ouput @ 1 phase, 1.0 P.F. LPG 8.5kw 10.0kw 12.0kw 16.0kw
NG 8.0kw 9.5kw 11.0kw 14.0kw
Standby @ 1 phase, 1.0 P.F. LPG 8.5kw 10.0kw 11.0kw 15.0kw
NG 8.0kw 9.0kw 10.0kw 12.5kw
Standby Amps @ 120V LPG 70 84 90 124
NG 66 74 84 104
Standby Amps @ 240V LPG 35 42 45 62
NG 33 37 42 52
3 PHASE MODELS SPH-85-3 SPH-100-3 SPH-120-3 SPV-160-3
Max. KW/KVA output @ 3 phase, .8 P.F. LPG 8.5/10.5 10.0/12.5 12.0/15.0 16.0/20.0
NG 8.0/10.0 9.5/11.8 11.0/13.8 14.0/17.5
Standby KW/KVA output @ 3 phase, .8 P.F. LPG 8.5/10.5 10.0/12.5 11.0/13.8 15.0/18.8
NG 8.0/10.0 9.0/11.0 10.0/12.5 12.5/15.6
ENGINE SPECIFICATIONS
Engine Manufacturer
Honda
Vanguard
Engine HP (nameplate) LPG 20 (22) 20 (22) 24 (26) 28 (32)
NG 18 (22) 18 (22) 21.5 (26) 23 (32)
Engine Cyl. 2 2 2 3
Engine RPM 2 POLE, 3600 RPM
Eng. Piston Area, CU. CM. 614 614 670 952
Engine Fuel LPG LPG fuel : 6 ounce pressure (11 in H2O column), vapor withdrawl system.
NG Natural gas: 4 ounce or 6 ounce pressure (7" or 11" water column).
GENERATOR SPECIFICATIONS
Type
Revolving field, CLC capacitor regulation.
Revolving field
"KLEEN-POWER"
Waveform distortions average only 6%.
3% - 4%
Electric Motor Start Ability for Code G motors LPG 2 3 5 6
NG 1-1/2 2 3-1/2 5
CONTROL SPECIFICATIONS
Controller Auto start-stop by special digital microprocessor.
Annunciator Monitor System Monitor and auto shutdown for: overcrank, overspeed, underspeed, low oil.
Generail annunciation for: low battery, not in standby, high temperature, and engine running.
Meter Package Run time meter and annunciators.
Circuit Breaker Standard equipment on all SP2 series Gen-Sets.
COMPLETE GENERATOR SET SPECIFICATIONS
Weather Housing All housings are made of rust-proofed galvanized steel and suitable for all weather conditions. Air Baffles and sound proof foam allows superior noise level reduction.
Open Set Dim (LxWxH)
36" X 31" X 25"
48"X 34" X 29"
Std. Housed Set Dim (LxWxH)
43" X 31" X 28"
57" X 34" X 32"
S.S. Housed Set Dim (LxWxH)
43" X 31" X 28"
57" X 34" X 32"

Available Accessories (SPECIAL ACCESSORIES AVAILABLE UPON REQUEST)

NOTES:

Technical specifications are subject to change. Please contact us to verify specifications.


© 2008-2009 HAPCO, INC. ALL RIGHTS RESERVED. | This page rendered in 0.33156 seconds. | Return to top.